Technical parameters
|
Model |
Power |
Maximum pressure |
Maximum consumption |
The size of the output |
The size of static pressure |
Gross weight |
Specification of packaging |
|
|
KW |
HP |
m |
L/min |
Inch |
m |
KG |
Qty. |
|
|
JS60 |
0.37 |
0.5 |
35 |
38 |
1 "× 1" |
9 |
6.8 |
1600 |
|
JS80 |
0.55 |
0.75 |
40 |
43 |
1 "× 1" |
9 |
7.2 |
1400 |
|
JS100 |
0.75 |
1 |
45 |
49 |
1 "× 1" |
9 |
7.6 |
1400 |
|
KJS370 |
0.37 |
0.55 |
32 |
60 |
1 "× 1" |
9 |
7 |
1370 |
|
KJS550 |
0.55 |
0.75 |
35 |
70 |
1 "× 1" |
9 |
9.5 |
1195 |
|
KJS750 |
0.75 |
1 |
40 |
85 |
1 "× 1" |
9 |
11 |
1195 |
|
KJS1100 |
1.1 |
1.5 |
48 |
100 |
1 "× 1" |
9 |
14.5 |
936 |
Peculiarities
1. The material made of stainless steel, from which a surface garden pump is made, has good corrosion resistance, does not rust and does not deform with prolonged use, which ensures stable operation of the pump.
2. Suitable for work at high temperature conditions, does not deform, does not become fragile and does not melt under the influence of high temperature.
3. It will not be damaged with prolonged use, and it is not easy to burst, leakage and other safety accidents that can ensure user safety.
4. Durability and stability are pretty good, which indirectly saves users and economic costs.
5. Internal polishing, smooth surface, without rust and ward residues, does not cause secondary fluid pollution.
6. It can withstand high pressure and high load.
Our advantage is quality control
|
No. |
Process |
Content |
|
1 |
Quality control of raw materials |
1. The scope of raw materials is carried out in accordance with the qualifications of suppliers, which must provide test protocols, certificates for materials and other relevant information. 2. The detachment of quality checks the materials in accordance with the requirements of technical documentation, and materials are received at the warehouse only after the qualification. |
|
2 |
Quality control of parts and components |
1. The processing of the barrel, shaft and rotor will be controlled strictly in accordance with the technological requirements, primary control, selective control and final control will be carried out. 2. Checking the key stages, such as the size of the bearing, the length of the shaft and the size of the key groove. |
|
3 |
Quality control of the core winding of the stator winding |
After the final line is completed, the voltage to the Earth, the withstanding voltage between the turns, the insulation resistance and the resistance to permanent current are checked to make sure that the winding stator meets the requirements. |
|
4 |
Mestures of paint immersion |
Diping of paint is a special process, the service life of the product depends on how high -quality or poor -quality is the workpiece for dipping the paint, so the paint for this process is dipped in the vacuum to make sure that the product meets the requirements of the quality. At the same time, viscosity, preliminary drying and drying temperature of the paint are controlled in accordance with the requirements of the process. |
|
5 |
Assembly |
A sample of the collected pump is a surface garden to check if the installation dimensions correspond to the requirements for the product. |
|
6 |
Factory control |
1. In accordance with the constructive requirements, it is necessary to conduct tests for locking, turning on, idle current, ground isolation, phase insulation, permanent current resistance, and other factory tests withstanded voltage. 2. Evaluation of engine operation. |
|
7 |
Checking finished products |
After the packaging is completed, the quality control department removes 1-2% of the configuration for verification and judges whether random accessories correspond to the requirements. |
It is multi -level quality control and control of each part that our outstanding quality provides.
Hot Tags: Surface garden pump, China pump surface garden manufacturers, suppliers, factory
